Do you want PCG Tools for your synth?

Discussion relating to all other KORG synth related products that don’t have a dedicated section. For example, OASYS PCI, M1, N Series, 01W series, T series, and more…

Moderators: Sharp, X-Trade, Pepperpotty, karmathanever

Post Reply
User avatar
michelkeijzers
Approved Merchant
Approved Merchant
Posts: 9112
Joined: Thu Feb 08, 2007 3:10 pm
Location: Netherlands
Contact:
Contact michelkeijzers

Do you want PCG Tools for your synth?

Post by michelkeijzers »

As most of you already know, I have been building a free software application that serves as a librarian and list generator for a lot of Korg workstations and and synthesizers.

For more information see: http://pcgtools.mkspace.nl

Since there is not that much respons to some older synthesizers, I doubt I should continue spending time to adding more synthesizers.

Therefor I decided to only add a synthesizer (series) when there are a reasonable amount of responses for that synth series.

So in case you like to have PCG Tools for your synth, please let me know, either by adding a reaction her, leaving a facebook message, sending an email or any other way.

I will put the list of reaction counts per synthesizer here so you will know when I will start on adding the support.

Code: Select all


 25 X3 / X2 / X3R
 23 Electribe
 17 PaX800 / PaX 900 / Pa600
 11 N364 / N264
 11 WaveStation
  8 X50 / microX
  7 X5 / X5D / X5DR / 05RW
  6 PA3X
  4 Radias
  3 KingKorg
  3 R3
  3 NS5R / NX5R
  3 N1 / N1R / N5
  2 DW-6000 / DW-8000
  2 Pa80 / Pa60 / Pa50
  1 EX800
  1 Poly-800
  1 Prophecy
  1 micro Arranger

  0 707
  0 DS8
  0 PS60
  0 i3 / i2
  0 i30
  0 i40M / i40HD / i4S
  0 i5S / i5M / iS35 / iS40 / iS50
  0 iX300
  0 Pa1X (Pro)
  0 Pa2X
  0 Poly-61
  0 Polysix
  0 BX3 / CX3
  0 SG
  0 SP-100 
  0 SP-500
If I missed one, let me know.
Last edited by michelkeijzers on Thu Oct 08, 2015 10:13 am, edited 89 times in total.
Image
Developer of the free PCG file managing application for most Korg workstations: PCG Tools, see https://www.kronoshaven.com/pcgtools/
Top
User avatar
iamtheswordmaster
Posts: 35
Joined: Sat Sep 22, 2012 5:45 am
Contact:
Contact iamtheswordmaster

Post by iamtheswordmaster »

Classic microKorg missing? ;-)
Korg M50, Korg Kaoss Pad KP-3, MicroKorg Black Edition, iMac, MacBook Pro, LogicPro X, Phonic Helix Board 24 FireWire, M-Audio MobilePre, Samson C01
Top
User avatar
michelkeijzers
Approved Merchant
Approved Merchant
Posts: 9112
Joined: Thu Feb 08, 2007 3:10 pm
Location: Netherlands
Contact:
Contact michelkeijzers

Post by michelkeijzers »

iamtheswordmaster wrote:Classic microKorg missing? ;-)
No the microKorg is already supported by PCG Tools.
Image
Developer of the free PCG file managing application for most Korg workstations: PCG Tools, see https://www.kronoshaven.com/pcgtools/
Top
_INTER_
Full Member
Posts: 210
Joined: Wed Aug 28, 2013 8:10 pm

Post by _INTER_ »

Korg Electribe EMX +1 :lol:
Top
User avatar
michelkeijzers
Approved Merchant
Approved Merchant
Posts: 9112
Joined: Thu Feb 08, 2007 3:10 pm
Location: Netherlands
Contact:
Contact michelkeijzers

Post by michelkeijzers »

_INTER_ wrote:Korg Electribe EMX +1 :lol:
Thanks for notifying me, but I already put your name in the list for the Electribe so one of the seven votes is yours (I found your and some other names in various PCG Tools related threads). :-)
Image
Developer of the free PCG file managing application for most Korg workstations: PCG Tools, see https://www.kronoshaven.com/pcgtools/
Top
Hugo
Platinum Member
Posts: 809
Joined: Fri Jun 23, 2006 10:57 pm

Post by Hugo »

Electrib EMX + Radias (including the plugin for M3, which is the one I have)
Top
User avatar
Thoraldus
Platinum Member
Posts: 2061
Joined: Sun Nov 28, 2010 8:35 am
Location: Rocky Mountains - SE IDaho

Post by Thoraldus »

PA600

The PA3X, PA900 & PA600 should be grouped together I think.

The PA2X, PA800 and PA500 would be a group that may or may not be different at the sysex level than the PA3X group. ;-)

Not sure where the PA300 falls in family but think it's in the PA3X group.
<i>”It’s easy to play any musical instrument: all you have to do is touch the right key at the right time and the instrument will play itself.”
<br>Johann Sebastian Bach
</i>
----------------------------------------------
Rick Stirling - Retired Electrical Engineer - Erstwhile Photographer
Korg Kronos2, Casio MZ-X500, PA600, AKAI MPD32, M-Audio Oxygen 25, ZOOM H6, Cakewalk Sonar
Top
User avatar
michelkeijzers
Approved Merchant
Approved Merchant
Posts: 9112
Joined: Thu Feb 08, 2007 3:10 pm
Location: Netherlands
Contact:
Contact michelkeijzers

Post by michelkeijzers »

Thoraldus wrote:PA600

The PA3X, PA900 & PA600 should be grouped together I think.

The PA2X, PA800 and PA500 would be a group that may or may not be different at the sysex level than the PA3X group. ;-)

Not sure where the PA300 falls in family but think it's in the PA3X group.
It might be but I'm not sure yet ... the PCG files for the arrangers are completely undocumented so I will check it when the total of all arrangers is getting to 100. I already grouped some together.
Image
Developer of the free PCG file managing application for most Korg workstations: PCG Tools, see https://www.kronoshaven.com/pcgtools/
Top
lordgnarington
Posts: 2
Joined: Fri May 09, 2014 5:30 pm
Location: Canada

Wavestation SR

Post by lordgnarington »

plz
Top
bakolaz
Posts: 1
Joined: Fri May 09, 2014 7:20 pm

Post by bakolaz »

Support for Korg X2/X3 please
Top
User avatar
michelkeijzers
Approved Merchant
Approved Merchant
Posts: 9112
Joined: Thu Feb 08, 2007 3:10 pm
Location: Netherlands
Contact:
Contact michelkeijzers

Re: Wavestation SR

Post by michelkeijzers »

lordgnarington wrote:plz
This is no vote right (?)
Image
Developer of the free PCG file managing application for most Korg workstations: PCG Tools, see https://www.kronoshaven.com/pcgtools/
Top
Stratario
Senior Member
Posts: 378
Joined: Sun Mar 21, 2010 5:43 am

Post by Stratario »

Hi Michel. You have this wonderful tool for workstations. We need it for arrangers very badly too. Pleasssseeeeee.


Amoo Farrokh
Canada
Top
User avatar
michelkeijzers
Approved Merchant
Approved Merchant
Posts: 9112
Joined: Thu Feb 08, 2007 3:10 pm
Location: Netherlands
Contact:
Contact michelkeijzers

Post by michelkeijzers »

Stratario wrote:Hi Michel. You have this wonderful tool for workstations. We need it for arrangers very badly too. Pleasssseeeeee.


Amoo Farrokh
Canada
Hello Amoo,

Which arranger?

Kind regards,

Michel
Image
Developer of the free PCG file managing application for most Korg workstations: PCG Tools, see https://www.kronoshaven.com/pcgtools/
Top
maestro1982
Posts: 45
Joined: Sat May 11, 2013 8:15 am

Post by maestro1982 »

PA600 Please!!!
Top
User avatar
michelkeijzers
Approved Merchant
Approved Merchant
Posts: 9112
Joined: Thu Feb 08, 2007 3:10 pm
Location: Netherlands
Contact:
Contact michelkeijzers

Post by michelkeijzers »

maestro1982 wrote:PA600 Please!!!
Vote is added.
Image
Developer of the free PCG file managing application for most Korg workstations: PCG Tools, see https://www.kronoshaven.com/pcgtools/
Top
Post Reply

Return to “Korg Synths (General)”