Sequencer runs out of memory?

Discussion relating to the Korg Oasys Workstation.

Moderators: Sharp, X-Trade, Pepperpotty, karmathanever

Post Reply
User avatar
Charlie
Platinum Member
Posts: 997
Joined: Mon Oct 30, 2006 11:33 am
Location: Austria

Sequencer runs out of memory?

Post by Charlie »

Got a new problem :(

I've got about 4 5-minute songs and about 15 1-minute songs in my sequencer file. When using eg. "copy measure" I get a warning "You can't undo this operation - are you sure" - well, not any more. And once I try to copy whole songs, I get the warning "memory full" and can't copy at all.

I've tried switiching of all the EXs - didn't change anything - same warnings. Next I started to delete songs that I right now didn't need and saved the whole sequencer file with a new name. That helped - but not for very long. I tried switching of too. Didn't help. I continued to work like that, the screen responded slower and slower until it froze completely. :roll:

Any suggestions? [-o<
Top
Mike Conway
Approved Merchant
Approved Merchant
Posts: 2492
Joined: Fri Jan 28, 2005 10:44 pm
Location: Las Vegas, Nevada

Post by Mike Conway »

Strange. I have a file that loads up 70 or 80 songs, but they are mostly MIDI and one or two with audio.

Are these songs using a lot of audio files? Is your EXs3 Brass, Karo and other libraries loaded? You might want to clear one of these out, before using the regular sequencer.
Last edited by Mike Conway on Tue Feb 05, 2008 9:16 pm, edited 1 time in total.
Top
User avatar
Charlie
Platinum Member
Posts: 997
Joined: Mon Oct 30, 2006 11:33 am
Location: Austria

Post by Charlie »

The sng-file has just 2,1 MB = it's a "baby-file" for 2 GB Memory :roll:
I unloaded EXs3, EXs2 and EXs1 and I have nothing from Karo loaded. It's as naked as it can be. Of course there are some audio-tracks - but only in 3 Songs out of the 15. It's just about the same dimension as always - actually it's a bit less than usual. Honestly, I have no idea what to do now. :(
Top
RC-IA
Approved Merchant
Approved Merchant
Posts: 974
Joined: Fri Jan 16, 2004 10:34 am
Location: FR

Post by RC-IA »

MAYBE, you could try to load those songs just with the original 1 go ram shipped with your oasys, just to make clear it's not the second 1go ram you put in. :?:
Top
jerrythek
Platinum Member
Posts: 2931
Joined: Mon Jan 28, 2002 11:06 pm

Post by jerrythek »

Do you have Multi-Rec turned ON? I know that our systems 'reserve' memory for this function and it holds back a fair amount of space...

That's one possibility.

Regards,

Jerry
Top
User avatar
Charlie
Platinum Member
Posts: 997
Joined: Mon Oct 30, 2006 11:33 am
Location: Austria

Post by Charlie »

YES - that must be it! I've been recording with Karma recording 4 Midi-Tracks at once. But I do not understand: once the recording is done, there is no more "multirecording". The operations I described above ("copy measure" eg.) have nothing to do with multirecording - they just copy simple midi-data - not much more than if the data to be copied would have been recorded without multirecording. :?
What can/shall I do now? :?:
Top
jgsidak
Full Member
Posts: 212
Joined: Sat Feb 03, 2007 2:08 am
Location: Washington, D.C.
Contact:
Contact jgsidak

Post by jgsidak »

I've encountered exactly the same problem that you describe. I always save edits on songs frequently when I start getting that message because I can't tell how soon the OASYS will freeze up.
Top
User avatar
Kontrol49
Platinum Member
Posts: 1280
Joined: Sat Mar 04, 2006 3:03 pm

Post by Kontrol49 »

Also turn off the "Aftertouch" you'd be surprised how much of that is generated..if you don't need it switch it off!!
Top
User avatar
danatkorg
Product Manager, Korg R&D
Posts: 4205
Joined: Fri Jan 21, 2005 7:28 am
Location: California, USA
Contact:
Contact danatkorg

Post by danatkorg »

Hi folks,

Sorry for the problems you're experiencing. We'll look into this.

One comment: loading EXs data should not affect the memory available to the sequencer.

Best regards,

Dan
Dan Phillips
Manager of Product Development, Korg R&D
Personal website: www.danphillips.com
For technical support, please contact your Korg Distributor: http://www.korg.co.jp/English/Distributors/
Regretfully, I cannot offer technical support directly.
If you need to contact me for purposes other than technical support, please do not send PMs; instead, send email to dan@korgrd.com
Top
User avatar
Charlie
Platinum Member
Posts: 997
Joined: Mon Oct 30, 2006 11:33 am
Location: Austria

Post by Charlie »

I thought (and hoped) so, Dan. However, I believe your guess with "Multiple Recording" was a good one. I just don't know, what to do now to avoid this issue (beside erasing lots of not so needed song slots). :?

I'm very much looking forward to any tipps what to try/do next, as I plan to use Karma (and therefor multiple recording) more in the future together with the sequencer. Just bought an iMac + KO - can't help using it now! :wink:
Top
jerrythek
Platinum Member
Posts: 2931
Joined: Mon Jan 28, 2002 11:06 pm

Post by jerrythek »

OK, we're on the first step into this. I know the system reserves memory so you can Compare/Undo after Multi-Rec, but I don't recall hoe to reclaim the memory after this. Did you try turning Off Multi-Rec, saving the file and then reloading it?

Just a guess.

Jerry
Top
User avatar
Charlie
Platinum Member
Posts: 997
Joined: Mon Oct 30, 2006 11:33 am
Location: Austria

Post by Charlie »

Ok - I'll try that once I'm back home - right now I enjoy holidays in the Austrian Alps! 8)
Thanx for the tipp! :D
Top
Post Reply

Return to “Korg Oasys”