cymbal crashes cutting out in sequencer

Discussion relating to the Korg Oasys Workstation.

Moderators: Sharp, X-Trade, Pepperpotty, karmathanever

Post Reply
jgsidak
Full Member
Posts: 212
Joined: Sat Feb 03, 2007 2:08 am
Location: Washington, D.C.
Contact:

cymbal crashes cutting out in sequencer

Post by jgsidak »

I've written about this problem before and gotten the suggestion to set the priority on the drum track containing the cymbal crash. That fix has worked in the past on other songs.

However, this time when I set the track priority in this manner, the other tracks become truncated on the beat of the cymbal crash.

So, I tried a work-around. I went back and eliminated all tracks that were not absolutely essential for the song. I figured that they much be chewing up memory, and that the truncation of the cymbal crash was essentially a problem of some kind of memory on a given beat being exhausted.

The work-around didn't work. The cymbal still cuts out at certain places in the song. So, any suggestions?
User avatar
danatkorg
Product Manager, Korg R&D
Posts: 4205
Joined: Fri Jan 21, 2005 7:28 am
Location: California, USA
Contact:

Re: cymbal crashes cutting out in sequencer

Post by danatkorg »

jgsidak wrote:I've written about this problem before and gotten the suggestion to set the priority on the drum track containing the cymbal crash. That fix has worked in the past on other songs.

However, this time when I set the track priority in this manner, the other tracks become truncated on the beat of the cymbal crash.

So, I tried a work-around. I went back and eliminated all tracks that were not absolutely essential for the song. I figured that they much be chewing up memory, and that the truncation of the cymbal crash was essentially a problem of some kind of memory on a given beat being exhausted.

The work-around didn't work. The cymbal still cuts out at certain places in the song. So, any suggestions?
Truncation means that voices are being stolen. This is completely separate from memory.

It sounds like this sequence is simply using a large number of voices. This might be because some of the sounds use lots of layers/stereo samples/wave sequences etc., or use higher-cost EXi such as the MS-20EX or STR-1, or use KARMA GEs which generate large numbers of notes. It can also be related to using many high-cost effects, or multiple CX-3s. The manual has more info on polyphony. My suggestion would be to record the most high-cost tracks to disk as audio.

Best regards,

Dan
Dan Phillips
Manager of Product Development, Korg R&D
Personal website: www.danphillips.com
For technical support, please contact your Korg Distributor: http://www.korg.co.jp/English/Distributors/
Regretfully, I cannot offer technical support directly.
If you need to contact me for purposes other than technical support, please do not send PMs; instead, send email to dan@korgrd.com
Post Reply

Return to “Korg Oasys”