Korg Forums

Sequenzzer wrote:Can someone verify this?

I started by using my Trinity to format the disks required. Then I copied the update files to the disks using my PC. Then I installed the update to the Trinity. It worked flawlessly.

Good info that's worth taking note of in case it happens to mine

WARNING! these trinitys have been passed around so much, all the stuff ripped out and resold its ridiculous. and thats not even the beginning. you cant see that the keys inside are chipped, the motherboards have glitches, output jacks are failing, joysticks falling apart. people have stolen any ...

Timo wrote:However I can't remember reading if you can flip it out or if it's soldered in.

I had mine open recently and unfortunately it's the solder in type.

Did you turn up anything yet?

You have loaded the respective PCG files as well as the KSC? (If I can recall, the Mega Piano programs may be held in bank D after loading the PCG.) Timo :oops: thank you so much for reminding me; I installed this PBS-TRI in my Trinity Plus 4 years ago and I'm so embarrassed, of course this was the ...

Yeah, I know you did and sorry if it sounded annoying repeating myself, I'm just trying to be overly helpful here... :) No no Joe, thank you and Timo too for the help! Sure you know how to do it, but a reminder can be a good thing, sometimes. I for one have installed chips the wrong way around and ...

Should be installed in the sockets circled in red and the notch/dot indicating pin1 should be on the yellow mark end of the socket. Make sure to carefully inspect each of the pins as they sometimes get bent inwards and looks like a good contact to the socket whereas they do not touch each other ...

Thanks to all! I think it's time to pop the cover again and check the RAM chips.

synthjoe wrote:Have you moved the two RAM chips (IC101 & IC102) and inserted with the right orientation into the new machine, as well?

Thanks and yes I did. Global screen P6 shows 4 banks of 2 Meg for an additional 8 Meg before loading files an way less after loading files which I believe is as it should be.

I had this PBS-Tri installed in my Trinity Plus and it worked perfectly for years. I love the Plus board so much that I decided to go for a V3 Pro upgrade and transfer the PBS to it which I did. After a full reset the V3 shows the PBS-Tri present on power up and when I go to the Global P6 screen it ...

Yes, that's it. P6 upper right hand corner.

Thanks so much for the quick response!

I know I came up against this before but I can't remember how I fixed it. I have a PBS TRI along with the RAM from a Trinity Plus that it was working perfectly in and I've now installed in a V3. I did a 0 + ENTER reset and the V3 shows the extra banks and lots of free space and reports the PBS TRI ...

hi there i am stuck with using a step up transformer to use a 110V trinity in a 220 V country.... i heard that there is a way to purchase the "220 voltage board" in the trinity so as to avoid using the transformer attached to the power cable.... what exactly do we call this "board"...has any one ...

I shattered the touch screen on my trinity pro drs. Totally bumming out !!! Gotta fix this ASAP ... Its not mine!!!! 2nd layer Glass fragments are visible and the top flexi clear layer has a small hole due to the falling object. How do I access this section to replace it. I dont want to start this ...