Korg Forums

Move the PSU, and any other PSUs away from the DI box, if possible. Try running as much of the rig as possible from a single power outled, using a multiway adapter, to minimise ground loops. Thanks! I will try to move my DI box further away from the PSU but my rack space is limited. I use a ...

Hi All, Happy to be back on this forum again. I recently bought a Triton Rack as a replacement for my Triton Extreme for my live rig. I mainly use this as a sampling device and vocoder (Queen coverband hooray). I noticed when introducing this piece of gear, a lot of hum was added to all my signals ...

I have the same problem with my TE61. -X does not work anymore unless I fully move it to the left. I opened the case and checked the potentiometer with a multimeter and that one appears to be the cause of the problem. Ofcourse you can't see when it malfunctions, but you can check it. Since I use my ...

I fear the only way to solve this is to replace the button. There is no way to switch off the tapping function of the Enter button.

My vote goes to the filters on the extreme (and my pitchbend that's still broken lol). Besides that, it's heaven.

There is a way to do this. When you are in the sampling menu, you have to select the left sample. Afterwards you have to open the dropdown menu and select “MS Mono To Stereo” (0–1H). You can find everything about sampling in the parameter guide on page 117 of the PDF

1. Which manual do you need? Cubase/Midi interface? You can find them on the web.
2. You will need an audio-interface and no midi-interface to do that. Midi is a protocol that contains messages about notes, volume, but no real audio.

Grtz
Wilbur

Happy birthday Lorenzo!

There is no way to do it completely automatically. What you can do is loading one sample and tune it to a C for example. Afterwards you can give up a range of keys where you want to map the sample, like C2-B2. Then the extreme will automatically tune the samples to the right key. Information about ...

I would like to integrate a Lexicon MPX1 in my live-setup. I'm trying to figure out how to switch effects on the MPX1 using the EX2 status in a combination. But for a reason, the extreme doesn't send any extra data through midi.

Can somebody help me with this problem?
Cheerz,
wilbur

I did dismantle my extreme yesterday because I had the same problem. When I used my joystick in the x- direction, the pitch bend occurred correctly only when done very fast. If the pitch bend was done slowly, it stayed on the same note untill lets say -50% and thats ofcourse not wishfull when ...

If you use 2 seperate pedals, you should use the damper pedal input and the assignable switch input. The last one will be the soft pedal ofcourse. This setting has to be selected in Global P2: Controller “Foot Switch Assign". Maybe another brand has a dual pedal, but sometimes the jacks don't fit v ...

You could use your damper pedal for your athmo sound and turn it of for your leadsound in the midifilter. If you turned of the pitch bend for the athmo sound and it still doesn't work, perhaps you could change bend value to 0 in the program? But still its weird the pitch bend does its job when its ...

And here's mine



Thought it was worse

Sorry, bad copy-paste

link